15oz French Press Travel Mug (White)

Parts Overview

• Double-wall insulated stainless steel body
• Built-in French press plunger with fine mesh filter
• Screw-on sip lid with slide closure
• Silicone sealing ring

Before First Use

1. Disassemble the plunger from the lid
2. Wash all parts with warm soapy water
3. Rinse thoroughly and dry
4. Reassemble

Brewing Instructions

Hot Coffee

1. Remove the lid and plunger assembly
2. Add 2 tablespoons (approx. 14g) of coarsely ground coffee
3. Pour hot water (195-205°F) to the fill line
4. Replace the lid with plunger in the up position
5. Wait 4 minutes
6. Press the plunger down slowly and evenly
7. Slide open the sip closure and enjoy

Loose-Leaf Tea

1. Remove the lid and plunger assembly
2. Add 1-2 teaspoons of loose-leaf tea
3. Pour hot water at the temperature appropriate for your tea type
4. Replace lid with plunger up
5. Steep for recommended time (varies by tea)
6. Press plunger to separate leaves and enjoy

Cold Brew

1. Add coarsely ground coffee (2:1 water-to-coffee ratio for concentrate)
2. Fill with cold water
3. Seal and refrigerate for 12-18 hours
4. Press plunger and enjoy over ice or dilute to taste

Cleaning & Care

• Disassemble the plunger and lid after each use
• Wash all parts with warm soapy water
• Use a small brush to clean the mesh filter thoroughly
• Do not use abrasive cleaners or steel wool
• Dry all parts completely before reassembly
• Do not put in the dishwasher

Travel Tips

• Always tighten the lid fully and close the sip slider before transport
• The mug is leak-proof when properly sealed
• Fits most standard car cup holders
• Do not leave in a hot car for extended periods

Safety

• Use caution when drinking hot beverages
• Do not microwave
• The exterior may become warm with very hot liquids
• Keep out of reach of children when containing hot beverages

Warranty

This product is backed by our satisfaction guarantee. Contact support@filteredblend.com for any issues.